Electrician Services
Distribution Board Repair in Al Barsha & Barsha Heights
The MELLS provides distribution board repair in Al Barsha with its own directly employed team. Repairs inside the distribution board: breakers, earth leakage devices, busbars and terminations. Needed when a breaker runs hot, buzzes, will not reset or shows scorch marks. We visit the property first and confirm the scope in a written quotation.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday
Distribution Board Repair at a glance
| Service | Distribution Board Repair |
|---|---|
| Location | Al Barsha & Barsha Heights, Dubai |
| Property types | Villas and apartments |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | 1 to 3 hours for most faults and small installations, with rewiring quoted per project |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
Electrician services for homes, offices and shops, covering fault finding, distribution boards, lighting, sockets, rewiring and urgent call outs. Long AC running hours load circuits heavily through the summer, while heat and humidity work on outdoor fittings and loose terminations. Our own electricians test before they change anything and explain the fault in plain terms. Where work may need DEWA or building approval, that is identified at the site visit and we prepare the paperwork that is asked for.
- Breakers and earth leakage devices tested and replaced like for like
- Loose or burnt terminations remade
- Circuits labelled clearly
- Any change that may need DEWA or building approval identified at the site visit
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Distribution Board Repair in Al Barsha: what we plan for
Al Barsha combines streets of large private villas in Al Barsha 2 and 3 with the apartment buildings of Al Barsha 1 around Mall of the Emirates. Barsha Heights is a district of residential and office towers, and Al Barsha South includes Arjan, Dubai Science Park and the Villa Lantana compounds. The MELLS office is in Barsha Heights.
Sheikh Zayed Road and Hessa Street carry heavy traffic, so an oily film builds on road facing glass and sills. City dust enters through the AC and settles on high ledges. Our technicians are based minutes away, so urgent AC and maintenance calls in Al Barsha are usually attended well inside the two hour window.
Villas are on open streets. Towers in Barsha Heights and Al Barsha 1 need a work permit and a service lift booking, which we arrange.
What your quotation depends on
A quotation for distribution board repair in Al Barsha follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related services in Al Barsha
Each one has its own scope and method.
Distribution Board Repair across Al Barsha
Questions about distribution board repair in Al Barsha
What does distribution board repair include?
Repairs inside the distribution board: breakers, earth leakage devices, busbars and terminations. Needed when a breaker runs hot, buzzes, will not reset or shows scorch marks. The work includes breakers and earth leakage devices tested and replaced like for like; loose or burnt terminations remade; circuits labelled clearly.
How much does distribution board repair cost in Al Barsha?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides distribution board repair in Al Barsha?
The MELLS provides distribution board repair in Al Barsha, Dubai. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does distribution board repair take?
Typically 1 to 3 hours for most faults and small installations, with rewiring quoted per project. The time for your property is confirmed with the quotation.
Can you add sockets or lights without damaging finished walls?
Often, yes. We look for existing conduits, ceiling voids and routes behind joinery first. Where cutting into a wall cannot be avoided, the quotation says so and describes how the surface will be made good.
Is it safe to reset a tripped breaker myself?
Once is reasonable. If it trips again, leave it off and call us, because a breaker that will not hold is reporting a real fault. Never tape or wedge a breaker in the on position.
How fast can an electrician get to Al Barsha?
A loss of power, a burning smell or a sparking socket is treated as urgent, which means a two hour response in Dubai from 08:00 to 19:00, Monday to Saturday.
How do your crews get access to Al Barsha?
Villas are on open streets. Towers in Barsha Heights and Al Barsha 1 need a work permit and a service lift booking, which we arrange.
Do you clean offices in Barsha Heights?
Yes. We run daily and weekly office cleaning contracts in Barsha Heights, scheduled before or after working hours.
How do I choose a company for distribution board repair in Al Barsha?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
Can you come to Al Barsha at short notice?
Yes. Crews travel from our Barsha Heights base, and urgent work in Dubai is attended within two hours between 08:00 and 19:00, Monday to Saturday.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.