Embassies District
Distribution Board Repair in Rawdhat, Embassies District
The MELLS provides distribution board repair in Rawdhat, Embassies District with its own directly employed team. Repairs inside the distribution board: breakers, earth leakage devices, busbars and terminations. Needed when a breaker runs hot, buzzes, will not reset or shows scorch marks. A supervisor visits first, and the written quotation follows before any work begins.
- Quotation
- Written, after a visit
- Response
- By appointment
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday
Distribution Board Repair at a glance
| Service | Distribution Board Repair |
|---|---|
| Location | Rawdhat, Embassies District, Abu Dhabi |
| Property types | Apartments |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | 1 to 3 hours for most faults and small installations, with rewiring quoted per project |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Visits in Abu Dhabi by appointment, Monday to Saturday |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
Electrician services for homes, offices and shops, covering fault finding, distribution boards, lighting, sockets, rewiring and urgent call outs. Long AC running hours load circuits heavily through the summer, while heat and humidity work on outdoor fittings and loose terminations. Our own electricians test before they change anything and explain the fault in plain terms. Where work may need the utility provider or building approval, that is identified at the site visit and we prepare the paperwork that is asked for.
- Breakers and earth leakage devices tested and replaced like for like
- Loose or burnt terminations remade
- Circuits labelled clearly
- Any change that may need the utility provider or building approval identified at the site visit
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Distribution Board Repair in Rawdhat: what we plan for
Rawdhat is a development of mid rise apartment buildings along Airport Road, many with shops, gyms or play areas at ground level. In an apartment building we submit the work permit, book the service lift and bring compact equipment that fits it.
Residences here usually run ducted AC, pumps and backup water storage. Servicing follows a schedule agreed with the facilities manager, and anything outside our scope is reported to them.
Access to embassy premises and diplomatic residences follows the site's own security procedure, confirmed at the site visit, and staff details are sent in advance for clearance. Apartment buildings need a work permit and a service lift booking, and we prepare the paperwork asked for.
What your quotation depends on
A quotation for distribution board repair in Rawdhat, Embassies District follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related services in Rawdhat
Each one has its own scope and method.
Nearby in Embassies District
Questions about distribution board repair in Rawdhat
What does distribution board repair include?
Repairs inside the distribution board: breakers, earth leakage devices, busbars and terminations. Needed when a breaker runs hot, buzzes, will not reset or shows scorch marks. The work includes breakers and earth leakage devices tested and replaced like for like; loose or burnt terminations remade; circuits labelled clearly.
How much does distribution board repair cost in Rawdhat, Embassies District?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides distribution board repair in Rawdhat, Embassies District?
The MELLS provides distribution board repair in Rawdhat, Embassies District, Abu Dhabi. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does distribution board repair take?
Typically 1 to 3 hours for most faults and small installations, with rewiring quoted per project. The time for your property is confirmed with the quotation.
Why does my breaker keep tripping in summer?
Usually because AC units, water heaters and kitchen appliances together draw more than the circuit was designed for, or because a breaker or connection has weakened with heat. We measure the load before recommending anything.
Does electrical work need the utility provider approval?
Some work may, for example changes that affect the connected load or the main supply. We identify this at the site visit and prepare the paperwork that the utility provider, the building or the community asks for.
Can you add sockets or lights without damaging finished walls?
Often, yes. We look for existing conduits, ceiling voids and routes behind joinery first. Where cutting into a wall cannot be avoided, the quotation says so and describes how the surface will be made good.
Do you arrange the building permit in Rawdhat, Embassies District?
Yes. Most buildings ask contractors for a work permit, trade licence, insurance and staff IDs, and a service lift booking. We submit all of it for you.
Do you clean diplomatic residences between postings?
Yes. A handover clean covers the whole house, from AC grilles and kitchen extractors to wardrobes and outdoor areas, with the scope agreed with the house or facilities manager at the site visit.
How do I choose a company for distribution board repair in Rawdhat, Embassies District?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
How are visits to Rawdhat, Embassies District arranged?
Visits in Abu Dhabi are booked by appointment between 08:00 and 19:00, Monday to Saturday. Call or send the form and we agree the earliest time a supervisor can come to you.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.