AC Installation
Split AC Installation in Town Square Dubai
The MELLS provides split AC installation in Town Square with its own directly employed team. A wall mounted indoor unit and an outdoor condenser are joined by insulated copper pipe through one core hole, then the lines are vacuumed, leak tested and run on test. A supervisor visits first, and the written quotation follows before any work begins.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday
Split AC Installation at a glance
| Service | Split AC Installation |
|---|---|
| Location | Town Square Dubai |
| Property types | Villas and apartments |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | Half a day for one split unit, longer for ducted systems |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
Supply and installation of split, ducted, cassette and multi split air conditioning for Dubai homes, offices and shops, sized to the room and tested at handover. Most cooling complaints in Dubai trace back to the day the unit was fitted: a pipe run too long or kinked, lines never vacuumed, a drain with no fall. Our own technicians check the room load and the power supply first, fit the unit to the manufacturer's instructions and record the temperatures on a test run. We fit a unit we supply or one you bought, and say so plainly if it is the wrong size for the room.
- Room load and breaker size checked before the unit is chosen
- Indoor back plate fixed level on solid fixings, clear of the ceiling
- Core hole drilled with a slight fall to the outside and sleeved
- Lines vacuumed on a gauge and leak tested before the valves open
How we carry out split AC installation
The back plate goes on the wall first, level and clear of the ceiling so air can reach the top intake. A core hole is drilled behind it with a slight fall outward. Outside, the condenser sits on a wall bracket or a pad with rubber mounts. The copper pipes are flared, tightened with a torque spanner and wrapped in insulation along the full run with the drain and the cable. A vacuum pump then pulls the lines down, the gauge is watched to see that it holds, and only then are the service valves opened.
Poor cooling from a new split unit nearly always comes from the pipework: a run longer than the maker allows, a kink behind the unit, or lines that were never vacuumed, which leaves moisture to attack the compressor. Dubai adds its own trouble. A condenser boxed into a hot balcony corner breathes its own exhaust and trips on high pressure in August. The site visit measures the run, looks at where the outdoor unit can breathe and confirms the supply can carry it.
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Split AC Installation in Town Square: what we plan for
Town Square is a large family community off Al Qudra Road, built by Nshama around a central park and Reel Cinemas square. Rows of townhouses such as Zahra, Hayat, Safi, Naseem, Noor and Sama sit beside mid rise apartment buildings including Zahra Breeze, Jenna, Warda, Rawda and UNA.
Open desert lies on two sides of the community, so wind carries fine sand into window tracks, balconies and AC filters. Many homes are still in their first years, and builder's dust, paint spots and silicone marks are often left behind from handover. AC units work hard this close to the desert, so filters and coils clog quickly. We clean them in the same visit and check the drain lines.
Townhouse streets are open to visitors with no gate pass. Apartment buildings need a work permit from building management and a service lift booking, and we arrange both.
What your quotation depends on
A quotation for split AC installation in Town Square follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related services in Town Square
Each one has its own scope and method.
Split AC Installation across Town Square
Questions about split AC installation in Town Square
What does split AC installation include?
A wall mounted indoor unit and an outdoor condenser are joined by insulated copper pipe through one core hole, then the lines are vacuumed, leak tested and run on test. The work includes room load and breaker size checked before the unit is chosen; indoor back plate fixed level on solid fixings, clear of the ceiling; core hole drilled with a slight fall to the outside and sleeved.
How long can the pipe run be?
Each model has a maximum length and a maximum height difference set by its maker, and going past either costs cooling and strains the compressor. Short and direct is always better. We measure the route at the site visit and choose a unit that suits it.
Where is the best place for the indoor unit?
High on a wall where the air can throw down the length of the room, not straight onto a bed or a desk, and close to an outside wall so the pipe run is short and the drain falls all the way. Tight into a corner or above a tall wardrobe works badly, because the returning air is blocked.
How much does split AC installation cost in Town Square?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides split AC installation in Town Square?
The MELLS provides split AC installation in Town Square, Dubai. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does split AC installation take?
Typically half a day for one split unit, longer for ducted systems. The time for your property is confirmed with the quotation.
Can you install a unit I have already bought?
Yes. We fit units supplied by us or by you. If the one you have bought is the wrong size for the room we tell you before it goes on the wall. An oversized unit cools fast but leaves the air damp, and an undersized one runs all day without reaching the set temperature.
What size of air conditioner does my room need?
Capacity follows the heat the room gains, not only its floor area. Glazing that faces the afternoon sun, ceiling height, a roof directly above, the number of people and any kitchen or equipment all add load. We measure and work it out at the site visit.
Can a split unit be fitted in any apartment?
No. The building decides where an outdoor unit may stand, and towers on chilled water do not take split units at all. We check the system and the building rules at the site visit and prepare the paperwork that management asks for.
How do your crews get access to Town Square?
Townhouse streets are open to visitors with no gate pass. Apartment buildings need a work permit from building management and a service lift booking, and we arrange both.
Do you cover every part of Town Square?
Yes. Our crews work in all the townhouse clusters and apartment buildings in Town Square, Monday to Saturday.
How do I choose a company for split AC installation in Town Square?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
Can you come to Town Square at short notice?
Yes. Crews travel from our Barsha Heights base, and urgent work in Dubai is attended within two hours between 08:00 and 19:00, Monday to Saturday.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.